Replace #16455Close#21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
This PR
- [x] Move some functions from `issues.go` to `issue_stats.go` and
`issue_label.go`
- [x] Remove duplicated issue options `UserIssueStatsOption` to keep
only one `IssuesOptions`
This PR
- [x] Move some code from `issue.go` to `issue_search.go` and
`issue_update.go`
- [x] Use `IssuesOptions` instead of `IssueStatsOptions` becuase they
are too similiar.
- [x] Rename some functions
This PR is to allow users to specify status checks by patterns. Users
can enter patterns in the "Status Check Pattern" `textarea` to match
status checks and each line specifies a pattern. If "Status Check" is
enabled, patterns cannot be empty and user must enter at least one
pattern.
Users will no longer be able to choose status checks from the table. But
a __*`Matched`*__ mark will be added to the matched checks to help users
enter patterns.
Benefits:
- Even if no status checks have been completed, users can specify
necessary status checks in advance.
- More flexible. Users can specify a series of status checks by one
pattern.
Before:
After:
---------
Co-authored-by: silverwind <me@silverwind.io>
Ref: #24638
IMO, parallelizing might run out server resources more quickly. Gitea
shouldn't use a lot of go-routine in a web handler.
And add a comment about how many repositories there could be at most.
Co-authored-by: Yarden Shoham <git@yardenshoham.com>
`http.ServeFile/ServeContent` handles `If-xxx`, `Content-Length`,
`Range` and `Etag` correctly
After this PR, storage files (eg: avatar) could be responded with
correct Content-Length.
fix#12192 Support SSH for go get
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
Although some features are mixed together in this PR, this PR is not
that large, and these features are all related.
Actually there are more than 70 lines are for a toy "test queue", so
this PR is quite simple.
Major features:
1. Allow site admin to clear a queue (remove all items in a queue)
* Because there is no transaction, the "unique queue" could be corrupted
in rare cases, that's unfixable.
* eg: the item is in the "set" but not in the "list", so the item would
never be able to be pushed into the queue.
* Now site admin could simply clear the queue, then everything becomes
correct, the lost items could be re-pushed into queue by future
operations.
3. Split the "admin/monitor" to separate pages
4. Allow to download diagnosis report
* In history, there were many users reporting that Gitea queue gets
stuck, or Gitea's CPU is 100%
* With diagnosis report, maintainers could know what happens clearly
The diagnosis report sample:
[gitea-diagnosis-20230510-192913.zip](https://github.com/go-gitea/gitea/files/11441346/gitea-diagnosis-20230510-192913.zip)
, use "go tool pprof profile.dat" to view the report.
Screenshots:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes#24624
This seems to have been broken in
https://github.com/go-gitea/gitea/pull/21563
Previously, this code read
```
// Are we looking at default webhooks?
if ctx.Params(":configType") == "default-hooks" {
return &orgRepoCtx{
IsAdmin: true,
Link: path.Join(setting.AppSubURL, "/admin/hooks"),
LinkNew: path.Join(setting.AppSubURL, "/admin/default-hooks"),
NewTemplate: tplAdminHookNew,
}, nil
}
// Must be system webhooks instead
return &orgRepoCtx{
IsAdmin: true,
IsSystemWebhook: true,
Link: path.Join(setting.AppSubURL, "/admin/hooks"),
LinkNew: path.Join(setting.AppSubURL, "/admin/system-hooks"),
NewTemplate: tplAdminHookNew,
}, nil
```
but was simplified to
```
return &ownerRepoCtx{
IsAdmin: true,
IsSystemWebhook: ctx.Params(":configType") == "system-hooks",
Link: path.Join(setting.AppSubURL, "/admin/hooks"),
LinkNew: path.Join(setting.AppSubURL, "/admin/system-hooks"),
NewTemplate: tplAdminHookNew,
}, nil
```
In other words, combining the `IsSystemWebhook` check into a one-liner
and forgetting that `LinkNew` also depended on it. This meant the
rendered `<form>` always POSTed to `/admin/system-hooks`, even when you
had GETed `/admin/default-hooks/gitea/new`.
Fixes#24145
To solve the bug, I added a "computed" `TargetBehind` field to the
`Release` model, which indicates the target branch of a release.
This is particularly useful if the target branch was deleted in the
meantime (or is empty).
I also did a micro-optimization in `calReleaseNumCommitsBehind`. Instead
of checking that a branch exists and then call `GetBranchCommit`, I
immediately call `GetBranchCommit` and handle the `git.ErrNotExist`
error.
This optimization is covered by the added unit test.
Implements displaying a README.md file present in a users ```.profile```
repository on the users profile page. If no such repository/file is
present, the user's profile page remains unchanged.
Example of user with ```.profile/README.md```
Example of user without ```.profile/README.md```
This pull request closes the feature request in #12233
Special thanks to @techknowlogick for the help in the Gitea discord!
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: Yarden Shoham <git@yardenshoham.com>
1. Remove unused fields/methods in web context.
2. Make callers call target function directly instead of the light
wrapper like "IsUserRepoReaderSpecific"
3. The "issue template" code shouldn't be put in the "modules/context"
package, so move them to the service package.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
The "modules/context.go" is too large to maintain.
This PR splits it to separate files, eg: context_request.go,
context_response.go, context_serve.go
This PR will help:
1. The future refactoring for Gitea's web context (eg: simplify the context)
2. Introduce proper "range request" support
3. Introduce context function
This PR only moves code, doesn't change any logic.
Due to #24409 , we can now specify '--not' when getting all commits from
a repo to exclude commits from a different branch.
When I wrote that PR, I forgot to also update the code that counts the
number of commits in the repo. So now, if the --not option is used, it
may return too many commits, which can indicate that another page of
data is available when it is not.
This PR passes --not to the commands that count the number of commits in
a repo
Close#24213
Replace #23830
#### Cause
- Before, in order to making PR can get latest commit after reopening,
the `ref`(${REPO_PATH}/refs/pull/${PR_INDEX}/head) of evrey closed PR
will be updated when pushing commits to the `head branch` of the closed
PR.
#### Changes
- For closed PR , won't perform these behavior: insert`comment`, push
`notification` (UI and email), exectue
[pushToBaseRepo](7422503341/services/pull/pull.go (L409))
function and trigger `action` any more when pushing to the `head branch`
of the closed PR.
- Refresh the reference of the PR when reopening the closed PR (**even
if the head branch has been deleted before**). Make the reference of PR
consistent with the `head branch`.
This gives more "freshness" to the explore page. So it's not just the
same X users on the explore page by default, now it matches the same
sort as the repos on the explore page.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Don't remember why the previous decision that `Code` and `Release` are
non-disable units globally. Since now every unit include `Code` could be
disabled, maybe we should have a new rule that the repo should have at
least one unit. So any unit could be disabled.
Fixes#20960Fixes#7525
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: yp05327 <576951401@qq.com>
Some old code doesn't respect the definition of `RequireSignInView` (the
`ignSignIn` is forgotten).
After #24413, this PR will do more fixes, ~~and rename the strange
`ignSignIn` to `optSignIn`.~~
This PR is ready for review, I think we can postpone the "ignSignIn"
renaming to another, to make this PR simple and clear.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Partially for #24457
Major changes:
1. The old `signedUserNameStringPointerKey` is quite hacky, use
`ctx.Data[SignedUser]` instead
2. Move duplicate code from `Contexter` to `CommonTemplateContextData`
3. Remove incorrect copying&pasting code `ctx.Data["Err_Password"] =
true` in API handlers
4. Use one unique `RenderPanicErrorPage` for panic error page rendering
5. Move `stripSlashesMiddleware` to be the first middleware
6. Install global panic recovery handler, it works for both `install`
and `web`
7. Make `500.tmpl` only depend minimal template functions/variables,
avoid triggering new panics
Screenshot:
<details>
</details>
## Changes
- Fixes the case where a logged in user can accept an email invitation
even if their email address does not match the address in the invitation
Co-Author: @wxiaoguang
It is more convenient that user just need to enter a new branch name after he selects the branch which he want to rename.
So this PR move the function of renaming branch to the page of branches list.
This PR also restyle the button of `new branch`, `download`, `delete`....
https://user-images.githubusercontent.com/33891828/235277997-413060bb-759f-430a-b5c4-df5e40ffcd28.mov
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The old `HTMLRender` is not ideal.
1. It shouldn't be initialized multiple times, it consumes a lot of
memory and is slow.
2. It shouldn't depend on short-lived requests, the `WatchLocalChanges`
needs a long-running context.
3. It doesn't make sense to use FuncsMap slice.
HTMLRender was designed to only work for GItea's specialized 400+
templates, so it's good to make it a global shared instance.
For my specific use case, I'd like to get all commits that are on one
branch but NOT on the other branch.
For instance, I'd like to get all the commits on `Branch1` that are not
also on `master` (I.e. all commits that were made after `Branch1` was
created).
This PR adds a `not` query param that gets passed down to the `git log`
command to allow the user to exclude items from `GetAllCommits`.
See [git
documentation](https://git-scm.com/docs/git-log#Documentation/git-log.txt---not)
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
There was only one `IsRepositoryExist` function, it did: `has && isDir`
However it's not right, and it would cause 500 error when creating a new
repository if the dir exists.
Then, it was changed to `has || isDir`, it is still incorrect, it
affects the "adopt repo" logic.
To make the logic clear:
* IsRepositoryModelOrDirExist
* IsRepositoryModelExist
